|
Sulfamic Acid Descalant
Product Details:
Product Description
Sulfamic Acid Descalant
Our high quality range of Sulfamic Acid Descalant is non hazardous & non flammable, and does not give off unbearable fumes. Our range is perfect for removing scales from cooling towers, coils, heat exchangers, condensers and heating & cooling systems. Sulfamic Acid Descalant increases the efficiency of working of a plant and equipment on cooling and cleaning surfaces by removing industrial scale.
Also available self indicating grade is available which could change color to show that efficacy of material is finished.
| Sulfamic Descalant | Specifications | |||
| Grades | GP Grade | HP Grade | SP Grade | |
| Product Code | SD - 01 | SD - 02 | SD - 03 | |
| Active | 90% | 97% | 98% | |
| Performance Enhancing chemicals, Percent by mass, max | 8% | 0.2% | 2% | |
| Grade | Key Characterizes | |||
| GP Grade | The GP grade may be used for removing scales obtained from water in heating and cooling systems e.g. boilers, heat exchangers, condensers, jackets and coils. | |||
| HP Grade | This formulation is recommended for scales containing high silica, Typical examples are scales found in sugar evaporators, caustic evaporators in the aluminium Industry and black liquor evaporators in the Pulp Industry | |||
| SP grade | This formulation is recommended for removal of scales from heat exchangers were scales are very severe and hard | |||
Application:
- As an immersion liquid
- Filling with a sulfamic acid descalant solution
Through circulation for consistent concentration though the closed circuit
Direction of use:
- Machines should be rinsed with water to remove loose flakes & sludge's before use
- Sulfamic acid descalant can be used in cold as well as with temperature ranging from 40º to 60ºC
- Powder should be added to warm water for an ideal solution
- The sample should be properly tested before using
- Proper ventilation is essential during usage of sulfumic descalant
- After cleansing the solution should be drained out and the system should be rinsed with water until pH value is neutral
We recommend rinsing with ROTO PASS - 212 for better metal prevention and passivation
GST : 36AAPFP7883D1ZO
Send Inquiry|
|
|
 |
PRIME LABORATORIES
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
