|
Product Description
Anthracite
Anthracite typically produces consistent improvements in turbidity removal because, in part, to more efficient solids loading. Low uniformity coefficient media also produces smaller changes in effluent turbidity during periods of peak influent turbidity. Our anthracite filter media is produced from the highest quality anthracite available to ensure the physical characteristics of hardness, durability and performance.
Technical Specifications
| Product | Filter Anthracite |
| Grade | FGA |
| Appearance | Black Granules |
| Carbon Content | 85 - 90% |
| Specific Gravity | 1.65 gm / cc |
| Acid Water Solubility | 0.7 + 0.3 |
| Caustic Solubility | <1% |
| Uniform Coefficient | 1.6 |
| Ash content | Less than 5% |
| Size | 0.8 mm 1.6 mm |
| Hydrochloric Acid Solubility | <2% |
| Hardness | 3.0 on MOH scale |
| Bulk Density | 920 Kg / M3 |
Conditions for Operation
- Bed depth: 24-36 in., 10-18 in multibed filters
- Freeboard: 50% of bed depth (min.)
- Service flow rate: 5 gpm/q. & or higher depending upon local conditions
- Backwash flow rate: 18-25 gpm/sq. ft.
- Backwash bed expansion: 20-40% of bed depth.
Greensand is used to remove iron, manganese and hydrogen sulphide from water resources. It is used alone or in combination with coal in dual media filtration systems.
| Manganese dioxide (Media) Synonyms : Manganese (IV) Oxide, Green Sand | |
| CAS No | 1313-13-9 |
| Molecular Formula | MnO2 |
| Molecular Weight | 86.94 |
| Description | Black Granular |
| SPECIFICATION | |
| Assay as MnO2 | 78% Min. |
| SIZING | |
| MM | Mesh |
| 0.425 - 0.85 mm | 36 x 18 |
| 0.5-1.00 mm | 30 x 16 |
| 0.8-2.00 mm | 18 x 8 |
| 1.00-2.00 mm | 16 x 8 |
| 2.00-4.00 mm | 8 x 4 |
| * Any Specific request for special size can be delivered. | |
We also specializes in custom grades of Iron removal media to meet your stringent specifications.
Quartz Sand (Silex)
Quartz sand and quartz silex used in the highest specification three layer multimedia filters in which the decreasing grain size in the direction of flow produces the ideal conditions for high filtration rates and long filter runs. It is also used in the various glass industry for glass manufacturing.
Size Available :
- 0.5 to 1.2mm
- 1 to 2mm
- 2 to 4mm
- 4 to 8mm
- 8 to 16mm
- 16 to 25mm
- 25 to 32mm
We also specializes in custom grades of Quartz Sand to meet your stringent specifications.
Water Filtration Gravel Pebble
Gravel and water filter pebble is composed of sub-angular, hard durable, and dense grains of predominately siliceous material. Extracted from a clean glacial deposit. Gravel and pebbles physical properties make it among the finest available in the world for water filtration applications. Our filter gravel is washed, clean dried, and screened to meet exacting specifications with strict adherence to quality control.
Size Available:
- 2 to 4 mm
- 4 to 8 mm
We also specializes in custom grades of Gravel Pebble to meet your stringent specifications.
Garnet Sand
Water Filter Sand
Water filter sand and Abrasive sand is composed of sub-angular, hard, durable, and dense grains of predominately siliceous material. Extracted from a clean glacial sand deposit, Water filter Sand and Abrasive sand physical properties make it among the finest available in the world for filtration applications. Water filter sand is washed, kiln dried, and screened to meet EXACTING specifications with strict adherence to quality control.
GST : 36AAPFP7883D1ZO
Send Inquiry|
|
|
 |
PRIME LABORATORIES
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
